Marley WH4503FC Wall Heater
- Model # WH4503FC
- Wall Heater
- 4,800 W
- 347V
Marley WH4503FC fan-forced electric wall heater rated 4800W on 347V single-phase power.
$1,937.60
Available on backorder
- Genuine MarleyFactory-new unit
- Same-Day ShippingIn-stock orders by 4 PM Central
- Repair PartsParts for this model
- Expert Support800-654-3545Mon–Fri, 8 AM–5 PM Central
Need parts for the Marley WH4503FC?
We carry 7 replacement parts for this model, all listed on one page.
Specifications
| Model Number | WH4503FC |
|---|---|
| Brand | Marley |
| Type | Wall Heater |
| Wattage | 4,800 W |
| Voltage | 347V |
| Colors | White & Bronze |
| Temp Range | 40°-90°F |
| CFM | 100 |
| Grille | 19-5/16" H x 15-3/4" W x 1-1/4" D |
| Back Box | 18-1/4” H x 14-3/8” W x 3-7/8” D |
| Voltage | 347V |
| Phase | Single phase |
| Wattage | 4800W |
| Current | 13.8A |
| Minimum Supply Wire | 12 AWG |
| Wall Opening (Existing Construction) | 14-1/2 in. W x 18-1/2 in. H |
| Manufacturer Code | 4.8KW 347V WH LINE 2 |
| Condition | New |
| SKU | YWH4503FC |
About the Marley WH4503FC
The Marley WH4503FC is a fan-forced electric wall heater from the WH Architectural Heavy-Duty series, made for comfort heating indoors. It runs on 347-volt single-phase power and is rated 4800 watts.
The heating element is switched on and off by a built-in thermostat, and a fan-delay control keeps the fan going for a short time after the element shuts off to clear leftover heat. Warm air leaves through openings along the bottom of the grille. The assembly also includes a manual-reset overheat limit, with a red reset button you can see through the grille, and a power on/off disconnect switch.
The heater recesses into a wall-mounted back box and is meant for indoor wall installation only, blowing air downward. It should not go in ceilings or floors, or in damp or wet locations. It conforms to ANSI/UL 2021 and CSA C22.2 No. 46.
Installation Tips
Turn off power at the breaker before working on the heater, and have a qualified electrician make the connections. In new construction, the back box mounts between two wall studs on 16-inch centers; in an existing wall, cut an opening 14-1/2 in. wide by 18-1/2 in. high. Keep the heater at least 8 in. above the floor and 8 in. from adjacent side walls; at least 36 in. to the ceiling is recommended. Do not connect a remote thermostat, and do not wire the unit in a way that bypasses the fan-delay off feature.
Ideal For
- Vestibules
- Entrance Ways
- Lobbies
- Hallways
- Stairwells
- Restaurants
- Conference Rooms
- Offices
- Basements
- Family Rooms
Ordering
| Availability | Backorder — call for an estimated ship date |
|---|---|
| Returns | See our return policy |
Why Buy From Carroll Parts?
- Helping Fix Things Since 1938Over 85 years of experience
- Same-Day ShippingIn-stock orders placed by 4 PM Central ship the same business day
- Repair Parts in One PlaceWe carry all available replacement parts for this model
- Real Experts800-654-3545 · Mon–Fri, 8 AM–5 PM Central
Frequently Asked Questions
Can I control it with a separate wall thermostat?
No. It has a built-in thermostat, and the installation instructions warn against connecting a remote thermostat.
Where can I find replacement parts for the Marley WH4503FC?
Every part we carry for this model is on its repair parts page. Not sure which part you need? Call 800-654-3545.
What voltage is the Marley WH4503FC?
It’s a 347V unit. Make sure it matches the supply voltage where it will be installed — call us at 800-654-3545 if you’re not sure.
When will my order ship?
This unit is currently on backorder. Call us at 800-654-3545 for an estimated ship date.
What is your return policy?
Items must be new and unused. You can return them within 90 days. Please read our return policy before sending anything back. Questions about a return? Call 800-654-3545 or email [email protected], Mon–Fri, 8 AM–5 PM Central.
What Our Customers Say About Carroll Parts








Replacement Parts for the Marley WH4503FC
See all parts →Parts listed for this exact model.







