Marley S1504TCNW Toe Space Heater
- Model # S1504TCNW
- Toe Space Heater
- 1,500 W
- 240V
Marley S1504TCNW 1500 watt 240V electric toe space heater for the kick space under cabinets.
$556.80
Available on backorder
- Genuine MarleyFactory-new unit
- Same-Day ShippingIn-stock orders by 4 PM Central
- Repair PartsParts for this model
- Expert Support800-654-3545Mon–Fri, 8 AM–5 PM Central
Need parts for the Marley S1504TCNW?
We carry 8 replacement parts for this model, all listed on one page.
Specifications
| Model Number | S1504TCNW |
|---|---|
| Brand | Marley |
| Type | Toe Space Heater |
| Wattage | 1,500 W |
| Voltage | 240V |
| Color | Black |
| Voltage | 240V / 208V |
| Wattage (High) | 1500W at 240V / 1125W at 208V |
| Wattage (Low) | 750W at 240V / 563W at 208V |
| Amperage | 6.3A / 5.4A high; 3.1A / 2.7A low (240V / 208V) |
| Wall Opening | 14-1/4" x 3-5/8" |
| Thermostat | Built-in single-pole |
| Manufacturer Code | 1500W 240V TOE SPACE NW |
| Condition | New |
| SKU | YS1504TCNW |
Ideal For
- Tight Fit Places
- Bathrooms
- Office Cubicles
Ordering
| Availability | Backorder — call for an estimated ship date |
|---|---|
| Returns | See our return policy |
About the Marley S1504TCNW
The Marley S1504TCNW is a 240-volt (also rated for 208 volts) fan-forced toe space heater made to install in the toe space below cabinets. We list it at 1500 watts; removing a red jumper wire drops it to a lower output setting.
It has a built-in single-pole thermostat, front and rear coil heating elements and a fan delay motor. An over-temperature safety control lights a red alarm lamp visible through the grille, and a one-shot thermal fuse permanently shuts the heater off if that control ever fails. It can also be wired to a remote single-pole wall thermostat instead.
The heater mounts horizontally in a 14-1/4 by 3-5/8 inch wall opening and must be installed with its back box and grille in place.
Installation Tips
Turn off power at the breaker before installing or servicing. Install the heater horizontally only, with the wall opening's bottom edge about 1/4 inch above the finished floor. Secure the grille and heater with two No. 6 x 3/4 inch screws in 0.093 inch pilot holes, use supply wire rated at least 60°C, and ground the heater. Confirm the supply voltage matches the nameplate before turning it on, and never run it without the grille.
Why Buy From Carroll Parts?
- Helping Fix Things Since 1938Over 85 years of experience
- Same-Day ShippingIn-stock orders placed by 4 PM Central ship the same business day
- Repair Parts in One PlaceWe carry all available replacement parts for this model
- Real Experts800-654-3545 · Mon–Fri, 8 AM–5 PM Central
Frequently Asked Questions
How do I switch it to the lower wattage?
Remove the red jumper wire in the heater's wiring; output then drops to 750 watts at 240V.
Can it go under vinyl-covered cabinets?
No. The installation instructions say not to install it under vinyl or vinyl-coated cabinets.
Where can I find replacement parts for the Marley S1504TCNW?
Every part we carry for this model is on its repair parts page. Not sure which part you need? Call 800-654-3545.
What voltage is the Marley S1504TCNW?
It’s a 240V unit. Make sure it matches the supply voltage where it will be installed — call us at 800-654-3545 if you’re not sure.
When will my order ship?
This unit is currently on backorder. Call us at 800-654-3545 for an estimated ship date.
What is your return policy?
Items must be new and unused. You can return them within 90 days. Please read our return policy before sending anything back. Questions about a return? Call 800-654-3545 or email [email protected], Mon–Fri, 8 AM–5 PM Central.
Replacement Parts for the Marley S1504TCNW
See all parts →Parts listed for this exact model.








