Marley R1500T2FC Wall Heater
- Model # R1500T2FC
- Wall Heater
- 1,500 W
- 120V
Marley R1500T2FC is a 120V, 1500-watt fan-forced wall heater with a built-in thermostat and field-adjustable wattage.
$608.00
if ordered in the next
Only 2 left in stock
- Genuine MarleyFactory-new unit
- Same-Day ShippingIn-stock orders by 4 PM Central
- Repair PartsParts for this model
- Expert Support800-654-3545Mon–Fri, 8 AM–5 PM Central
Need parts for the Marley R1500T2FC?
We carry 10 replacement parts for this model, all listed on one page.
Specifications
| Model Number | R1500T2FC |
|---|---|
| Brand | Marley |
| Type | Wall Heater |
| Wattage | 1,500 W |
| Voltage | 120V |
| Color | White |
| Temp Range | 40°-85°F |
| CFM | 50 |
| Grille | 16-7/8” W X 7-3/4” H X 7/8” D |
| Back Box | 14-3/8” W X 4-5/8” H X 4-3/8” D |
| Voltage | 120V |
| Wattage | 1500 / 1125 / 750 / 375W (selectable) |
| Amps | 12.5 / 9.4 / 6.3 / 3.1A |
| Thermostat | Built-in, 2-pole |
| Wall Cutout | 14-1/2 in W x 6-3/4 in H (existing construction) |
| Manufacturer Code | 1500W 120V W T2STAT W SH |
| Condition | New |
| SKU | YR1500T2FC |
About the Marley R1500T2FC
The R1500T2FC is a recessed fan-forced electric wall heater from Marley's RT2 series. RT2 models have a thermostat built into the heater, so no separate wall thermostat is needed. It runs on 120V and ships set to its full 1500 watts.
Output can be lowered on site by clipping jumpers on the Clip 'n' Fit circuit board, giving 1500, 1125, 750 or 375 watts. An automatic-reset limit control shuts the heater off if it overheats, and a red warning light stays on until it resets.
The heater fits into a back box in a 2x4 or larger stud wall and must be mounted horizontally, with the motor and thermostat on the right side. It works in new or existing construction.
Installation Tips
Turn off power at the breaker before working. Mount horizontally with the motor and thermostat on the right; do not install sideways or upside down. The manual calls for clearances of 4 in from the floor, 6 in from an adjacent wall and 36 in from the ceiling, with power entering through the right-end knockouts only. Use building wire rated at least 60°C. In existing walls the cutout is 14-1/2 in wide by 6-3/4 in high, with the bottom at least 4 in above the finished floor.
Ideal For
- Bedrooms
- Living/Family Rooms
- Kitchens
- Bathrooms
- Basements
- Offices
- Conference Rooms
- Hallways
- Lobbies
- Waiting Rooms
Ordering
| Availability | In stock |
|---|---|
| Ships | Same business day if ordered by 4 PM Central |
| Returns | See our return policy |
Why Buy From Carroll Parts?
- Helping Fix Things Since 1938Over 85 years of experience
- Same-Day ShippingIn-stock orders placed by 4 PM Central ship the same business day
- Repair Parts in One PlaceWe carry all available replacement parts for this model
- Real Experts800-654-3545 · Mon–Fri, 8 AM–5 PM Central
Frequently Asked Questions
How do I lower the wattage?
It ships at 1500 watts. Clip out one or both jumpers on the Clip 'n' Fit circuit board, cutting close to the board and following the manual's chart, to step down to 1125, 750 or 375 watts.
Does it need a back box?
Yes. It mounts in the RBB back box, installed in a 2x4 or larger stud wall.
Where can I find replacement parts for the Marley R1500T2FC?
Every part we carry for this model is on its repair parts page. Not sure which part you need? Call 800-654-3545.
What voltage is the Marley R1500T2FC?
It’s a 120V unit. Make sure it matches the supply voltage where it will be installed — call us at 800-654-3545 if you’re not sure.
When will my order ship?
In-stock orders placed by 4 PM Central ship the same business day.
What is your return policy?
Items must be new and unused. You can return them within 90 days. Please read our return policy before sending anything back. Questions about a return? Call 800-654-3545 or email [email protected], Mon–Fri, 8 AM–5 PM Central.
What Our Customers Say About Carroll Parts








Replacement Parts for the Marley R1500T2FC
See all parts →Parts listed for this exact model.








