Marley RP349SA Radiant Heater
- Model # RP349SA
- Radiant Heater
Marley three-element infrared heater enclosure, 46-inch, with a 90° symmetrical reflector and painted steel housing. Elements sold separately.
$1,522.40
Available on backorder
- Genuine MarleyFactory-new unit
- Same-Day ShippingIn-stock orders by 4 PM Central
- Repair PartsParts for this model
- Expert Support800-654-3545Mon–Fri, 8 AM–5 PM Central
Need parts for the Marley RP349SA?
We carry 11 replacement parts for this model, all listed on one page.
Specifications
| Model Number | RP349SA |
|---|---|
| Brand | Marley |
| Type | Radiant Heater |
| Enclosure Type | Painted Steel; Stainless Steel |
| Element Type* | Metal Sheathed; Quartz Tube and Quartz Lamp - Sold Seperately |
| Reflective Angle | 30° Symmetrical; 60° Symmetrical; 60° Asymmetrical; 90° Symmetrical |
| Color | Bronze; Stainless Steel |
| Number of Elements | 3 (enclosure only, elements not included) |
| Nominal Length | 46 in |
| Reflector | 90° symmetrical |
| Housing | Painted steel |
| Element Types Accepted | Quartz lamp, quartz tube or metal sheath |
| Minimum Clearances | 24 in to walls, 6 in to ceiling, 84 in to floor, 36 in side by side |
| Manufacturer Code | PTD 3EL 46IN 90SYM ENCLOSURE ONLY F |
| Condition | New |
| SKU | YRP349SA |
About the Marley RP349SA
The Marley RP349SA is a three-element infrared (radiant) heater enclosure with a painted steel housing, a 46-inch nominal length and a 90° symmetrical reflector. It is an enclosure only: the heating elements are picked and ordered separately to suit the voltage and wattage your job calls for.
The enclosure accepts quartz lamp, quartz tube or metal sheath elements, and the elements must always sit horizontally. It mounts to a ceiling by surface, conduit or chain methods (chain mounting is for indoor use only), and it can go on a wall with the optional RP-WMB wall mounting bracket. Keep the painted housing out of corrosive locations like marine sites, greenhouses and chemical storage rooms; a stainless steel version of the series is the better choice there.
Allow at least 24 in. to side walls, 6 in. to the ceiling, 84 in. to the floor and 36 in. between heaters mounted side by side, and keep combustible materials at least 6 ft from the front of the heater. Don't tilt the heater toward a wall.
Installation Tips
Disconnect power at the main service panel before wiring, servicing or taking the heater apart. Use copper supply wire rated at least 90°C, ground the heater with its green grounding lead, and run it only with ground-fault equipment protection. Make sure the supply voltage matches the element nameplate before turning it on. Don't cycle the elements more than five times per hour, and don't handle quartz lamps or tubes with bare hands. Pick a thermostat, timer or contactor panel rated for the voltage and amperage of the elements you install.
Ideal For
- Car Washes
- Parking Garages
- Arenas
- Showrooms
- Workshops
- Loading Docks
- Aircraft Hangers
- Warehouses
- Gymnasiums
- Swimming Pools
- Walkways
- Entryways
- Ski Resorts
- Sports Arenas
- Driving Ranges
- Bus Stops
- Smoking Areas
- Patios
Ordering
| Availability | Backorder — call for an estimated ship date |
|---|---|
| Returns | See our return policy |
Why Buy From Carroll Parts?
- Helping Fix Things Since 1938Over 85 years of experience
- Same-Day ShippingIn-stock orders placed by 4 PM Central ship the same business day
- Repair Parts in One PlaceWe carry all available replacement parts for this model
- Real Experts800-654-3545 · Mon–Fri, 8 AM–5 PM Central
Frequently Asked Questions
Does this heater come with heating elements?
No. It is sold as an enclosure only. Elements are chosen separately (quartz lamp, quartz tube or metal sheath) based on the voltage and wattage you need.
Can it be mounted on a wall?
Yes, with the optional RP-WMB wall mounting bracket. In any mounting position the elements must stay horizontal.
Where can I find replacement parts for the Marley RP349SA?
Every part we carry for this model is on its repair parts page. Not sure which part you need? Call 800-654-3545.
When will my order ship?
This unit is currently on backorder. Call us at 800-654-3545 for an estimated ship date.
What is your return policy?
Items must be new and unused. You can return them within 90 days. Please read our return policy before sending anything back. Questions about a return? Call 800-654-3545 or email [email protected], Mon–Fri, 8 AM–5 PM Central.
What Our Customers Say About Carroll Parts








Replacement Parts for the Marley RP349SA
See all parts →Parts listed for this exact model.




