How to Fix a Jammed InSinkErator Disposal in 4 Easy Steps
A jammed garbage disposal can be a frustrating and potentially messy problem. But don’t worry, fixing a jammed disposal is usually a simple process that you can do yourself with a few tools and some patience. Here’s a step-by-step guide on how to fix a jammed garbage disposal.
Safety First
Before you begin, make sure turn the power off at the circuit breaker and unplug the disposal unit. This will help prevent any electrical shock or injury while you’re working on the disposal.
Tools You’ll Need
You will need a flashlight, pliers, and a jam buster wrench.
Step 1: Locate the Jam
Shine your flashlight into the disposal unit to try and locate the cause of the jam. Look for any foreign objects, such as utensils, bones, or large pieces of food that may have become stuck in the disposal blades.
Step 2: Access the Jam
If the jam is visible, you can try to remove it using pliers. If the jam is not visible, you will need to access it from below. To do this, locate the hex-shaped hole at the bottom of the disposal unit and insert the wrench. Turn the wrench back and forth to try and loosen the jam.
Step 3: Reset the Disposal Unit
Once the jam has been cleared, turn the power back on at the circuit breaker and plug the disposal unit back in. If the red reset button is sticking out, press the button back in to reset the disposal and restart it.
Step 4: Test the Disposal Unit
Turn on the water and run the disposal unit to make sure it’s working properly. If it’s still not functioning correctly, you may need to call an authorized service center for further assistance.
Conclusion
Fixing a jammed garbage disposal is a simple process that you can do yourself with a few tools and some patience. By following these steps, you can get your disposal unit working properly again in no time. And always remember to prioritize safety first when working on any electrical appliance.
For further questions or assistance feel free to contact us 8-5PM CT Mon-Fri call 800-654-3545 or email [email protected]